A lift kit is a set of matched suspension components, usually springs, shocks or struts and supporting hardware, that raises a 4x4's ride height. It works by holding the body and chassis higher above the axles, which adds ground clearance, creates room for larger tyres and lets the suspension carry accessories and load properly.

If you're new to modifying a 4x4, the term lift kit gets thrown around a lot without much explanation. In simple terms, it's the hardware that makes a vehicle sit higher, but a good one does far more than add height. Below we explain what's in a kit, how it works on different suspension types and what it changes about the way a 4x4 drives. To see options for your vehicle, browse our 4x4 lift kits.

What Does a Lift Kit Do?

A lift kit raises the distance between the axles and the chassis. On a 4x4 that translates into more clearance under the sills, chassis rails and fuel tank, better approach and departure angles, and space in the wheel arches for slightly larger tyres.

Just as important, a suspension lift kit replaces factory components that were designed for an unladen vehicle on sealed roads. Uprated springs carry the weight of a bull bar, winch, canopy or touring gear without sagging. Better shocks control the suspension over corrugations and rough tracks, keeping tyres in contact with the ground for more traction.

So while height is the headline, capability under load is where a quality lift earns its keep.

What Comes in a Lift Kit?

The contents depend on the vehicle's suspension design, but a complete kit is built as a matched set. A typical Formula 4x4 lift kit includes:

•        Front struts or coil springs and shocks: On independent front suspension utes, these are often supplied as pre assembled struts, which we call ReadyStruts.

•        Rear springs: Either coil springs or leaf spring packs, rated to suit the vehicle's typical load.

•        Rear shocks: Valved to match the springs and the lift height.

•        Supporting hardware: Items such as U bolts, shackles, bushes or mounting hardware where the design calls for them.

Some vehicles and lift heights also call for extra components, like upper control arms or extended brake lines, to keep geometry and clearances correct.

Buying a matched kit avoids the poor ride and early wear that come from mixing springs and shocks never designed to work together.

How Does a Lift Kit Work on Different Suspension Types?

Most Australian 4x4s and utes use one of three suspension layouts, and a lift kit works slightly differently on each.

Independent front suspension with coilover struts: Common on modern utes and wagons. The lift comes from a taller strut assembly or a spring seat set higher on the strut. Our height adjustable lift kits let that seat be set within a range.

Leaf spring rear: Most dual cab utes use leaf springs at the back. The lift comes from a new spring pack with more arch and the right load rating, matched with longer shocks.

Coil spring live axles: Found on vehicles like older Patrols and some LandCruisers. Taller coils and longer shocks lift the vehicle at each corner.

Older vehicles with torsion bar fronts are lifted by adjusting or replacing the torsion bars, along with longer shocks.

What Changes When You Fit a Lift Kit?

A lift improves clearance and load handling, but it also changes a few things you should plan for. The centre of gravity rises, so the vehicle has a little more sway in corners, which matched springs and shocks help control. Steering geometry shifts, so a 4x4 wheel alignment is needed after fitting, and larger lifts may need caster correction, explained in caster correction after lifting your 4x4.

Lift height is also regulated, and most states allow about 50mm of suspension lift without certification, and we explain the details in is a 3 inch lift legal in QLD.

Planning for these changes up front gives you a lift that's capable, compliant and comfortable from day one.

Is a Lift Kit and Suspension the Same Thing?

People often use the two terms interchangeably, and there's a good reason why. A suspension lift kit is new suspension, designed to sit higher. Our kits replace the factory springs and shocks with uprated components, so you're upgrading your suspension and gaining height in the same job.

Body lifts are the exception, raising the body on the chassis with spacer blocks and leaves the suspension unchanged, which is why we recommend suspension lifts for real capability. See body lift vs suspension lift for a full comparison.

Types of Formula 4x4 Lift Kits

Kit type

What it offers

Best suited to

Fixed height lift kits

Matched springs and shocks set to one height

Daily driving, weekend tracks, moderate touring

Height adjustable lift kits

Front ReadyStruts with ride height set within a range

Builds still adding accessories, levelling the front

Adjustable remote reservoir lift kits

Adjustable damping with remote reservoir shocks

Corrugations, heavy touring, sand and towing

GVM upgrades

Certified increase in legal carrying capacity

4x4s running at or over their factory GVM

FAQs

Looking for more information about suspension lift kits? Below we answer the most commonly asked questions

What is a suspension lift kit?

It's a complete set of springs, shocks or struts and hardware that raises a vehicle at the wheels while upgrading how its suspension handles load and rough terrain.

How much lift does a lift kit give?

Most kits for road registered 4x4s give around 25mm to 50mm of lift, with 2 inch (50mm) the most popular. Higher lifts are available but often need certification.

Does a lift kit improve ride quality?

Usually yes, as replacing tired factory springs and shocks with matched, quality components generally improves control and comfort, especially when the vehicle is loaded.

Can I fit a lift kit myself?

It's possible with the right tools, but front struts hold a lot of stored energy and the vehicle needs an alignment afterwards. Our guide on how to install a lift kit explains what's involved.

Does a lift kit increase payload?

No, because a lift kit helps a loaded vehicle sit and handle properly, but only a certified GVM upgrade raises the legal carrying capacity.

How much does a lift kit cost?

On our current range, kits start from around $790 before fitting. See how much a 4x4 lift kit costs to install for a full breakdown.

To see what fits, search by vehicle in our 4x4 lift kits range.