On many 4x4s you can physically fit 33 inch tyres with a 2 inch lift, but whether it's legal without certification depends on your factory tyre size. Most states allow a tyre up to 50mm larger in diameter than the largest size on your placard, so 33s suit vehicles that left the factory on roughly 31 to 32 inch tyres.

33 inch tyres are one of the most searched upgrades for Australian 4x4s, and a 2 inch lift is usually the first step toward them. The good news is the two often work together well. The catch is that fit and legality are separate questions, and both need checking before you buy. Below we show you how to work it out for your own vehicle. To find the right lift, browse our 4x4 lift kits.

How Big Is a 33 Inch Tyre in Millimetres?

A 33 inch tyre is about 838mm in overall diameter. Common Australian sizes that measure close to 33 inches include 285/70R17 and 285/75R16, which sit at around 831mm and 834mm.

To compare against your current tyre, work out its diameter from the sidewall code. Multiply the width by the aspect ratio to get sidewall height, double it, then add the rim diameter in millimetres. A 265/65R17 works out to about 776mm, while a 265/65R18 is about 802mm.

Once you know both numbers, the difference tells you how much bigger the new tyre really is.

Is It Legal to Fit 33 Inch Tyres?

Australian rules generally allow a tyre up to 50mm larger in diameter than the largest size listed on your tyre placard without certification. Queensland, NSW and Victoria also allow that tyre increase on top of a 50mm suspension lift, for a combined 75mm. We cover the details state by state in is a 3 inch lift legal in QLD.

Here's how that plays out on two common factory sizes:

•        Factory 265/65R17 (about 776mm): A 33 inch tyre is roughly 62mm larger, which exceeds the 50mm allowance and needs certification.

•        Factory 265/65R18 (about 802mm): A 33 inch tyre is roughly 36mm larger, which sits inside the allowance.

That's why two owners with the same lift can get different answers, so check your own placard before buying.

Will 33s Fit With a 2 Inch Lift Without Rubbing?

A 2 inch lift raises the body away from the tyre, creating more room in the wheel arch. On many wagons and utes, that's enough for a tyre around 32 to 33 inches to clear at normal ride height.

Rubbing usually happens at full lock and full compression, where the tyre swings toward the inner guard, mud flap or bumper. Wheel offset plays a big part, since wheels that push the tyre further out can contact the guard lip. Some vehicles need minor trimming of plastic flares or mud flaps, a body mount chop or a different wheel to clear a full 33.

Our kits are engineered to a set height so your fitting dealer can check clearance accurately. On height adjustable kits, a few extra millimetres of front height can make the difference, as explained in how height adjustable suspension works.

A test fit at full lock with the suspension compressed is the only reliable way to confirm clearance.

What Else Changes With Bigger Tyres?

Larger tyres bring benefits off road, including more diff clearance and a bigger footprint for traction in sand. They also change a few things on road that are worth planning for:

•        Speedometer reading: A taller tyre makes the speedo read low, so it may need recalibrating.

•        Gearing and performance: Effective gearing gets taller, which can dull acceleration and towing performance.

•        Braking: Heavier tyres and wheels add rotating mass, so stopping distances can increase.

•        Load rating: Replacement tyres must meet or exceed the load rating on your placard.

If your 4x4 carries heavy touring gear or has a GVM upgrade, the load rating becomes even more important, which we explain in what tyre load rating you need after a GVM upgrade.

Tyre Size and Lift Guide

Factory tyre

Approx diameter

33 inch increase

Within 50mm allowance?

265/65R17

776mm

About 62mm

No, certification needed

265/60R18

775mm

About 63mm

No, certification needed

265/70R17

803mm

About 35mm

Yes

265/65R18

802mm

About 36mm

Yes

 

Diameters are calculated from tyre codes and are approximate. Always check against the largest tyre size on your placard and confirm with your state authority.

FAQs

Looking for more information about fitting 33 inch tyres with a 2 inch lift? Below we answer the most commonly asked questions

Can I fit 33 inch tyres with a 2 inch lift?

Physically, yes on many vehicles, sometimes with minor trimming. Legally, it depends on whether the 33 is no more than 50mm larger in diameter than the largest tyre on your placard.

What size is a 33 inch tyre in metric?

Common metric sizes close to 33 inches include 285/70R17 and 285/75R16. Always check the manufacturer's listed diameter, as actual sizes vary between brands.

How much lift do I need for 33 inch tyres?

Many vehicles need around 2 inches of lift to clear 33s comfortably. Our guide on how much lift your 4x4 actually needs explains how to choose a height.

Do bigger tyres count toward lift height?

Yes, as a tyre adds about half its diameter increase to ride height, so a tyre 50mm larger in diameter lifts the vehicle about 25mm. Learn more in what is a lift kit and how does it work.

Will 33 inch tyres affect fuel economy?

Usually yes, as heavier, taller tyres with aggressive tread add rolling resistance and rotating mass, so fuel use tends to rise.

Do I need a wheel alignment after fitting bigger tyres?

If the tyres go on with a lift, the vehicle needs an alignment for the lift anyway. Larger tyres alone don't normally change alignment, but it's worth checking.

If you're planning for bigger rubber, start with the right height from our 4x4 lift kits range.