Strut spacers lift a 4x4 by fitting a block above the factory strut, keeping the original spring and shock. Adjustable struts replace the whole assembly with a new spring and shock and let you set the height within a range. Spacers suit a light, budget lift on an unloaded vehicle, while adjustable struts suit accessories, touring and load.

Strut spacers are one of the most searched lift options in Australia, mostly because they're simple and affordable. They have a place, but they work very differently to a complete strut upgrade, and choosing the wrong one for your build can leave you with a lifted vehicle that still sags, rides poorly or wears out quickly. Below we compare the two so you can choose with confidence. To see complete assemblies for your vehicle, browse our height adjustable lift kits.

How Do Strut Spacers Work?

A strut spacer is a machined block that sits between the top of the factory strut and the body mount. By pushing the whole strut assembly down relative to the body, it raises the front ride height, typically by around 25mm to 50mm.

Nothing else on the vehicle changes, so the factory coil spring, its rate and the factory shock absorber all stay in place. That's what keeps the cost down and the fitting quick.

Spacers are a common way to level a ute's nose or gain a little height on a vehicle that runs light and stays close to standard.

How Do Adjustable Struts Work?

A height adjustable strut is a complete new assembly: a new shock absorber body, a new coil spring and a spring seat that can be positioned to set ride height within a range. On our height adjustable lift kits, these come pre assembled as ReadyStruts, ready to bolt in.

Because the spring and shock are new and matched to each other, the strut is designed to work at the lifted height rather than being pushed beyond where the factory parts were intended to operate. You can also reset the height later if accessories are added. We explain the mechanism in detail in how height adjustable suspension works on a 4x4.

The extra cost buys a strut that carries load, controls movement and lifts the vehicle in one package.

What Are the Downsides of Strut Spacers?

Spacers raise height without changing what holds the vehicle up, and that brings some limitations to weigh up:

•        No added load support: The factory spring still has the same rate, so a bull bar or winch will still pull the front down.

•        Factory shock damping: Worn or soft factory shocks stay in service and now work at a different part of their stroke.

•        Reduced droop travel: Lowering the strut relative to the body can limit how far the wheel drops before the shock tops out, which can feel harsher off road.

•        Geometry changes: Like any lift, spacers change CV angles, camber and caster, so an alignment is still needed.

For a vehicle that's carrying weight or doing serious kilometres off road, those limits matter.

When Do Adjustable Struts Make More Sense?

Adjustable struts are the better choice once your 4x4 starts working for a living. That includes vehicles with a steel bull bar and winch, utes running a canopy and touring gear, and any 4x4 regularly driven on corrugations or rough tracks.

A new strut with a spring suited to the front end weight holds the height under load, while a matched shock controls the extra travel and keeps tyres in contact with the ground for better traction. The ability to adjust height means the same strut can be reset as your build changes, rather than buying again.

Every Formula 4x4 kit is backed by our 5 year / unlimited km warranty, which gives peace of mind for vehicles that work hard.

Strut Spacers vs Adjustable Struts Compared

Feature

Strut spacers

Height adjustable struts

What's replaced

Nothing, a block is added

Complete strut, spring and shock

Lift method

Pushes factory strut down

Spring seat set within a range

Load support

Unchanged factory spring

Spring matched to the kit

Damping

Factory shock

New, matched shock

Height adjustment later

Swap spacer

Reset spring seat

Best suited to

Light, budget lift on standard vehicles

Accessories, touring, towing and off road

FAQs

Looking for more information about strut spacers? Below we answer the most commonly asked questions

Are strut spacers legal in Australia?

A spacer lift within your state's basic limit is generally permitted without certification, as long as the vehicle remains safe and roadworthy. See is a 3 inch lift legal in QLD for the limits.

Do strut spacers ruin ride quality?

They don't always, but they can make the ride harsher off road if droop travel is reduced, and they leave tired factory shocks in place.

Can I use strut spacers with a bull bar?

You can, but the factory spring won't support the extra weight, so the front will still sag. Our guide to coil springs for a bull bar and winch explains what to look for.

Do I need an alignment after fitting strut spacers?

Yes, because any front lift changes camber, caster and toe, so an alignment is needed after spacers or new struts.

Is a levelling kit the same as a strut spacer?

Many levelling kits use front strut spacers to remove factory rake. We compare the approaches in levelling kit vs lift kit.

How much do adjustable strut lift kits cost?

Most of our height adjustable lift kits sit between $1,390 and $2,899 before fitting, depending on the vehicle.

For a front end that carries load and holds its height, choose from our height adjustable lift kits.