Height adjustable suspension on a 4x4 uses front struts with a movable spring seat, so ride height can be set anywhere within the kit's range instead of being locked to one figure. That lets you level the front after a bull bar or winch goes on, suit a heavier load and reset the height later if your build changes.
Adjustable suspension on a 4x4 solves a problem most owners run into sooner or later. You fit a lift, add a steel bar and winch, and the nose that sat level on day one now sits low. With height adjustable struts, the front is raised to suit the new weight instead of replacing parts. Browse our height adjustable lift kits to see the range available for your vehicle.
How Does a Height Adjustable Strut Change Ride Height?
A front strut carries the coil spring on a seat, and where that seat sits on the strut body decides how high the vehicle rides. On a fixed strut the seat is welded in one place. On a height adjustable strut, the seat can be moved up or down to raise or lower the front.
There are two common designs across the industry. Threaded struts use a collar that winds along the body, giving any height within the range. Circlip struts use machined grooves with the seat held by a clip, giving a set number of fixed positions. Either way, the change happens with the spring compressed, which makes it a workshop job with the right equipment rather than a roadside tweak.
Our ReadyStruts arrive as complete pre assembled struts, with the spring already fitted and the height preset, so your fitting dealer bolts them in and sets the final position to suit your vehicle. Moving the seat changes ride height, while the spring rate stays the same, so the setting should match the weight the front actually carries.


Fixed Height vs Height Adjustable Lift Kits: What's the Difference?
A fixed height kit, like a set of strut spacers, gives you one answer. We compare the options in strut spacers vs adjustable struts. If the vehicle stays as it is, carries a similar load every day and runs the tyre size the kit was designed around, that single height works well and keeps cost down.
A height adjustable lift kit gives you a range. One set of struts can cover, for example, 30mm to 40mm of lift, so the same parts suit the vehicle with or without a bar, a winch or a heavier canopy. When the build changes, the height is reset instead of buying new struts.
That flexibility suits owners who build in stages, since you can set a modest height now and raise the front once planned accessories are fitted. If your 4x4 is still evolving, adjustable struts usually work out cheaper over the life of the build.
When Does Adjustable Ride Height Make the Most Sense?
The biggest benefit shows up at the front of the vehicle, where accessory weight lands. A steel bull bar and winch can add significant mass over the front axle, and a fixed strut set for a bare front end will sit lower once they go on. An adjustable strut lets the front be set to match the accessories fitted, so the vehicle sits level loaded rather than nose down.
Adjustable struts also make sense when:
• You're moving to larger tyres: A few extra millimetres of front height can clear a bigger tyre at full lock and full compression.
• The load changes through the year: Touring season, work use and towing all put different weight on the front end.
• The vehicle is getting a new role: A canopy going on or a tray coming off changes how the vehicle sits.
• You want a precise height for compliance: Setting an exact figure is easier than hoping a fixed strut lands where you need it.
For towing and touring, fine tuning the stance also keeps headlights aimed correctly and steering feel consistent.
How Much Adjustment Do Our Height Adjustable Lift Kits Offer?
The range depends on the vehicle, because each kit is engineered around that platform's front end weight and suspension travel. Current ranges across our kits include 25 to 40mm, 30 to 35mm, 30 to 40mm, 35 to 40mm and 40 to 50mm, along with 2 inch (50mm) kits.
The adjustment is built into the front ReadyStruts, with the rest of the kit matched to suit, so you get a complete system rather than a mix of parts that were never designed to work together. Every kit is backed by our 5 year / unlimited km warranty.
When choosing a setting, start with what the vehicle weighs as it's actually driven, then factor in planned accessories and tyre size. Most owners land near the middle of the range, leaving room to go up or down later, and a setting based on real load gives the best ride and steering.
What Changes When You Raise the Front of a 4x4?
Raising the front does more than add clearance. Camber and caster move as the control arms work through a different part of their arc, so a 4x4 wheel alignment is needed after every height change. On independent front suspension, CV angles increase with height, and larger lifts may need upper control arms with correction built in or a diff drop. A higher centre of gravity also means a little more vehicle sway, which correctly matched springs and shocks keep in check.
Winding the seat to the top of its range is another trap, because the extra preload can reduce droop travel and make the ride feel harsher off road, as explained in what spring preload does.
How Is Height Adjustment Different From Adjustable Damping?
Height adjustment and damping adjustment are often confused, because both get called "adjustable suspension". Height adjustment changes where the vehicle sits, while damping adjustment changes how the shock controls movement over bumps, corrugations and corners.
Our adjustable remote reservoir lift kits combine both, with preload adjustable front springs plus adjustable compression and rebound. We explain the damping side in what remote reservoir shocks are and whether they're worth it.
|
Setup |
What adjusts |
Typical range |
Best suited to |
|
Fixed height lift kit |
Nothing, set at one height |
One set lift |
Vehicles that stay unchanged |
|
Height adjustable lift kit |
Front ride height via spring seat |
25 to 50mm depending on vehicle |
Staged builds, accessory weight, levelling the front |
|
Adjustable remote reservoir lift kit |
Front ride height plus compression and rebound damping |
From standard height to 4 inch depending on kit |
Corrugations, heavy touring, sand and towing |
FAQs
Looking for more information about height adjustable lift kits? Below we answer the most commonly asked questions
Can I adjust coilover or strut height myself?
Do I need a wheel alignment after changing ride height?
Does adjusting the strut height change ride comfort?
Can I raise the front later when I fit a bull bar or winch?
What are pre assembled struts?
Is height adjustable suspension road legal in Australia?
Does a height adjustable lift kit increase load capacity?
How much does a height adjustable lift kit cost?
Want a lift that keeps up with your build? Find the height adjustable lift kits to suit your 4x4, or browse every option in our 4x4 lift kits range.

