How does car suspension work?

Suspension combines tyres, springs, shock absorbers, sway bars, links and control arms to keep the tyres in contact with the road, improving traction, braking and stability.

How much does it cost to repair suspension?

Costs depend on the parts and wear found during inspection. A checkup identifies whether bushes, shocks or other components need replacement.

How do I know if my suspension needs repair?

Look for clunks or squeaks over bumps, uneven tyre wear, poor straight-line tracking, excessive body roll or instability under braking.

Is it safe to drive with worn suspension?

No. Worn parts can reduce braking performance and control. Book an inspection before further driving.

What are common suspension problems?

Misalignment, perished OE rubber bushes, leaking or faded shocks, incorrect components installed, wrong or illegal lift setups and ride-height issues.

How long does a suspension repair take?

Typical jobs take about 1–5 hours depending on the vehicle and parts involved.

What are the signs of a bad wheel alignment?

Steering wheel off-centre, pulling to one side, vibration or tramlining, and rapid or uneven tyre wear.

What happens if I skip wheel alignments?

Handling suffers and tyres wear quickly, which increases running costs.

When should I replace suspension bushings?

Replace when you see cracks, excessive movement or noise. Polyurethane bushings are a durable upgrade where available.

When should I consider a 4x4 lift kit?

When you need more ground clearance, wheel travel or to accommodate larger tyres and accessories. Choose a vehicle-specific kit.

Do I really need a wheel alignment and suspension check?

Yes. Alignment keeps geometry correct and reduces tyre wear. A suspension check spots issues early.

How often should alignment be done?

About every 12 months or sooner after off-road use, impacts, new tyres, or suspension changes.

How often should I check the power steering rack and pump?

Follow the service schedule; a good rule of thumb is periodic checks around every 20,000 km (12,000 miles) to prevent wear-related issues.

Suspension Bushes with Fitting Position Rear Axle for FORD FALCON AU Wagon, Ute and Cab Chassis

AU Wagon, Ute and Cab Chassis FALCON Suspension bushings play a critical role in how a AU Wagon, Ute and Cab Chassis FALCON handles, rides, and responds to load and roa...

AU Wagon, Ute and Cab Chassis FALCON Suspension bushings play a critical role in how a AU Wagon, Ute and Cab Chassis FALCON handles, rides, and responds to load and road conditions. They cushion and control movement between AU Wagon, Ute and Cab Chassis FALCON suspension components, helping maintain alignment, absorb vibration, and support predictable suspension operation.

Over time, worn bushings can lead to excess movement, noise, reduced handling control, and premature wear across suspension components. Upgrading AU Wagon, Ute and Cab Chassis FALCON bushings is one of the most effective ways to restore suspension stability and improve overall vehicle feel.

Why Upgrade AU Wagon, Ute and Cab Chassis FALCONSuspension Bushings?

Factory rubber bushings are designed to balance comfort and isolation, but they can degrade under heat, load, off-road use, and age. As bushings soften or crack, suspension geometry can shift under braking, acceleration, and cornering, reducing handling consistency and increasing tyre wear.

Polyurethane bushings offer a more durable alternative, helping reduce unwanted movement and improve suspension precision. Upgrading bushings helps tighten suspension response, improve vehicle control, and extend component life, particularly for vehicles driven off-road, under load, or fitted with suspension upgrades.

AU Wagon, Ute and Cab Chassis FALCONBushings & Bush Kit Range

The bushing range includes vehicle-specific bushes and kits designed to suit key suspension mounting points.

AU Wagon, Ute and Cab Chassis FALCON Leaf spring bushes: Leaf spring bushes support the mounting points of leaf spring suspension systems, controlling movement and reducing vibration under load. Replacing worn bushes helps maintain rear suspension stability and improves ride consistency, especially on work and touring vehicles.

AU Wagon, Ute and Cab Chassis FALCON Sway bar bushes: Sway bar bushes secure the sway bar to the chassis while allowing controlled movement. Upgraded bushes help maintain effective sway control, reduce noise, and improve suspension balance during cornering and articulation.

AU Wagon, Ute and Cab Chassis FALCON Control arm bushes: Control arm bushes control suspension arm movement and play a major role in alignment stability. Replacing worn bushes helps restore steering response, improve tyre contact, and reduce uneven tyre wear.

AU Wagon, Ute and Cab Chassis FALCON Trailing arm bushes: Trailing arm bushes support rear suspension stability by controlling fore-and-aft movement. Upgrading these bushes helps improve rear-end control, reduce driveline movement, and maintain consistent handling.

AU Wagon, Ute and Cab Chassis FALCON Radius arm bushes: Radius arm bushes support suspension control and steering stability on many 4x4 platforms. Replacing worn bushes helps reduce steering wander, improve straight-line stability, and restore predictable suspension movement under load.

Each bush type is designed to support correct suspension geometry and long-term durability.

Key Benefits of AU Wagon, Ute and Cab Chassis FALCONPolyurethane Bushings and Kits

Reduced unwanted suspension movement and flex

Improved steering response and suspension control

Better alignment stability and reduced tyre wear

Increased durability compared to worn factory rubber

Improved performance for off-road, towing, and load use

Upgrading bushings helps restore suspension precision and consistency across real-world driving conditions.

Who Are AU Wagon, Ute and Cab Chassis FALCONBushings and Bush Kits For?

Bushings and bush kits are well suited to:

AU Wagon, Ute and Cab Chassis FALCONs with worn suspension bushes or increased noise

AU Wagon, Ute and Cab Chassis FALCONs with vague handling or steering wander

AU Wagon, Ute and Cab Chassis FALCONs driven off-road or under constant load

Owners refreshing suspension components during upgrades

Drivers seeking improved suspension durability and control

Replacing worn bushings is one of the most effective ways to restore vehicle handling and comfort.

Upgrade Your AU Wagon, Ute and Cab Chassis FALCONSuspension with Premium Bushings

Shop premium suspension bushings and bush kits online and upgrade to a more durable alternative for your AU Wagon, Ute and Cab Chassis FALCON. Browse polyurethane bushings designed to restore control, reduce unwanted movement, and improve long-term suspension performance.

Read less

SuperPro Spring Front Eye Bush Kit

$156.00

Fully installed for $866.00
within 2 weeks

in stock
Ships within 3 business days.
Rear Leaf Spring Shackle Bushes to suit Ford Falcon Au 98-02

$82.01

Fully installed for $507.01
within 2 weeks

in stock
Ships within 3 business days.
Fish Plate Spacer Kit (6mm)

$226.00

Fully installed for $746.00
within 2 weeks

preorder

Available for Preorder. Stock due on 01/11/2026.
Rear Leaf Spring Front Eye Bush Kit to suit Ford Falcon 2002-2008 - BA, BF Ute & Cab Chassis (round style)

$164.00

Fully installed for $874.00
within 2 weeks

in stock
Ships within 3 business days.
Leaf Spring Saddle Mount Bush Kit

$122.00

Fully installed for $547.00
within 2 weeks

in stock
Ships within 3 business days.
Leaf Spring Slipper Pad Bush Kit

$74.00

Fully installed for $784.00
within 2 weeks

in stock
Ships within 3 business days.
Rear Leaf Spring Front Eye Bush Kit to suit Ford (oval style)

$164.00

Fully installed for $779.00
within 2 weeks

in stock
Ships within 3 business days.
Leaf Spring Bush Kit - Oval Style Front Eye

$376.00

Fully installed for $1,181.00
within 2 weeks

in stock
Ships within 3 business days.
Rear Leaf Spring Front Eye Bush Kit to suit Ford Falcon 2002-2008 - BA, BF Wagon (round style)

$180.00

Fully installed for $890.00
within 2 weeks

in stock
Ships within 3 business days.