3800kg GVM & 7200kg GCM Formula 4x4 Upgrade kit to suit Ford Ranger PY, P703 2022-on (does not suit Raptor)
Your purchased parts will be delivered to your nearest Formula AU outlet and installation will be organised. All you have to do is bring your car, we will take care of the rest!
3800kg GVM & 7200kg GCM Formula 4x4 Upgrade Kit to Suit Ford Ranger PY P703 2022-On (Excludes Raptor)
Increase the load-carrying and combined vehicle towing capability of your Ford Ranger Next-Gen with the Formula 4x4 3800kg GVM & 7200kg GCM Upgrade Kit (RANG-GVM3800-GCM), engineered and tested for demanding Australian conditions.
This comprehensive suspension upgrade increases the factory Gross Vehicle Mass (GVM) from 3250kg to 3800kg, providing an additional 550kg of legal load-carrying capacity. It also increases the Gross Combination Mass (GCM) from 6350kg to 7200kg (+850kg), allowing greater combined vehicle and trailer mass within the approved limits.
Ideal for tradespeople, farmers, mining operators, caravan owners and touring enthusiasts, this upgrade combines Formula 4x4 front ReadyStruts, Big Bore rear shock absorbers, heavy-duty rear leaf springs and supporting suspension components to improve load support, handling and stability under demanding conditions.
GVM & GCM Upgrade Specifications
- Original GVM: 3250kg
- Upgraded GVM: 3800kg (+550kg)
- Original GCM: 6350kg
- Upgraded GCM: 7200kg (+850kg)
- Front Axle Rating: 1480kg to 1620kg
- Rear Axle Rating: 1959kg to 2180kg
- Rated Towing Capacity: 3500kg (unchanged)
- Original Maximum Towball Download: 350kg (no upgraded rating specified)
The upgrade increases the vehicle's permitted GVM, GCM and axle ratings, allowing greater flexibility when carrying additional vehicle loads while towing. Actual available payload and towing capacity remain subject to vehicle configuration, fitted accessories and applicable weight limits.
Key Features & Benefits
- 550kg GVM Increase: Greater legal load-carrying capacity for tools, equipment, accessories and touring loads.
- 850kg GCM Increase: Raises the permitted combined vehicle and trailer mass to 7200kg without increasing the original 3500kg towing capacity.
- Improved Axle Load Ratings: Increased front and rear axle capacities to accommodate additional vehicle loads.
- Formula 4x4 Front ReadyStruts: Pre-assembled front suspension units designed to support additional front-end weight and streamline installation.
- Formula 4x4 Big Bore Shocks: Low-pressure nitrogen design with improved heat dissipation for consistent damping and suspension control.
- Heavy-Duty Rear Leaf Springs: 400kg constant-load springs designed to support additional loads while maintaining ride stability.
- 40-50mm Suspension Lift: Approximate lift under loaded conditions, with additional height possible when unloaded. Actual height varies with vehicle configuration and load.
- Australian Engineered: Designed, tested and developed for demanding Australian driving conditions.
- ADR88 ESC Tested: The Ranger GVM upgrade has undergone Electronic Stability Control testing.
Kit Components
- 1 x Formula 4x4 Front ReadyStrut Pair (RANGER122H-FOR, 75kg)
- 2 x Formula 4x4 Rear Shock Absorbers (50036)
- 2 x Heavy-Duty Rear Leaf Springs (FLS-169, 400kg constant load)
- 4 x Formula 4x4 U-Bolts (FUB-005)
- 1 x Greasable Leaf Spring Fitting Kit (KIT168SK)
- 1 x Rear Centre Bearing Spacer Kit (TRC0048)
- 1 x Front Sway Bar Link Kit (TRC0049)
- 2 x CAT 6 Side Direction Indicators (77ACMB-RANGER22)
- 1 x GVM Tyre Placard (PX4PLAC3800)
- 1 x GVM/GCM Load Compliance Label (PX4LCL3800-GCM)
- 1 x Headlight Adjuster (SPF5719K)
Optional Upper Control Arms - Sold Separately
Compatible fixed upper control arms are available to assist with suspension geometry and wheel alignment:
- TRC6750: Fixed Upper Control Arms for vehicles with aluminium steering knuckles.
- TRC6751: Fixed Upper Control Arms for vehicles with steel steering knuckles.
Upper control arms are not included in the upgrade kit and must be purchased separately if required. Confirm steering knuckle compatibility before ordering.
Vehicle Compatibility
Suitable for applicable Ford Ranger PY P703 (PX4) 4x4 models from May 2022 onwards, including XL, XLS, XLT, Sport, Wildtrak, Wildtrak X, Platinum, Tremor and Wolftrak variants. Applicable Single Cab, Super Cab, Double Cab, Cab Chassis and Utility configurations are covered.
Does not suit Ford Ranger Raptor. Vehicle eligibility must be confirmed before installation.
GVM/GCM Certification & Installation
GVM and GCM upgrades require professional installation, engineering approval and certification in accordance with applicable state or territory regulations.
Upgrade kits are shipped directly to certified dealers only and must be installed by an authorised and approved Fulcrum Suspension workshop.
Our Click & Fit service allows you to purchase online and select a local approved installer. A Fulcrum Suspension specialist will contact you to confirm vehicle specifications, loading requirements and installation arrangements.
Pre-Registration Vehicles: Eligible unregistered vehicles can be upgraded under the applicable pre-registration approval process, with no additional engineering certification charge through our stated service arrangement.
Post-Registration Vehicles: Registered vehicles require additional engineering certification and modification approval. Applicable charges are displayed during online checkout.
Important GVM, GCM & Towing Information
The upgrade increases GVM to 3800kg and GCM to 7200kg but does not increase the original 3500kg rated towing capacity.
GVM Lift Kit
Upgrade your 4WD’s load-carrying capacity, ride height and suspension performance with a professionally engineered GVM Lift Kit.
A Gross Vehicle Mass, or GVM, upgrade increases the maximum permitted operating weight when the kit is correctly installed, inspected and certified. This provides additional capacity for passengers, permanent accessories, tools, touring equipment and other essential loads.
Unlike a standard suspension lift, a GVM Lift Kit is developed as a complete suspension package. Matched springs, shock absorbers and supporting components work together to improve load control, ride quality, stability and handling on sealed roads, corrugations and off-road terrain.
Key Benefits
- Increased legal load-carrying capacity when approved and certified
- Improved ride height and ground clearance
- Better stability and body control under load
- Reduced suspension sag with correctly matched springs
- Improved handling across touring, towing, work and off-road conditions
- Heavy-duty springs and matched shock absorbers
- Application-specific components for reliable performance
Correct spring selection is essential. Permanent accessories and constant loads, including bull bars, winches, batteries, canopies, drawers, tools and recovery equipment, must be considered when configuring the kit.
After purchase, a Fulcrum Suspensions specialist will confirm your suspension setup, permanent load, towing requirements and intended use before processing the order.
Professional installation, wheel alignment and certification are required. A GVM upgrade does not increase Gross Combined Mass, axle ratings or towing capacity unless specifically included in the applicable approval.
Increase your carrying capacity with a suspension package engineered for the job. Order your GVM Lift Kit today, and our team will confirm the correct configuration before installation.
*All prices shown on the website include GST. You will not be charged any additional fees related to tax. For international orders, GST is removed, local import duties or taxes may apply but will not be charged by us.
| SKU | RANG-GVM3800-GCM |
|---|---|
| Foot Note 1 | Kit contains: Formula 4x4 ReadyStrut Kit RANGER122H-FOR x 1, Formula 4x4 Shocks 50036 x 2, Formula 4x4 Leaf Springs FLS-169 x 2, Formula 4x4 U-Bolts FUB-005 x 4 |
| Foot Note 2 | Kit contains: SuperPro Shackle, Pin & Bush Kit KIT168K x 1, SuperPro Centre Bearing Spacer Kit TRC0048 x 1, SuperPro Sway Bar Link Kit TRC0049 x 1, Cat 6 Indicators 77ACMB-RANGER22 x 1 |
| Foot Note 3 | GVM: OEM 3250kg - Formula 3800kg |
| Components Per | 1 Kit |
| Sub brand | Formula 4x4 |
| Product Note | All GVM Upgrade Kits are supplied with appropriate documentation and can only be fitted by an authorised and approved Fulcrum Workshop. |
| EAN | RANG-GVM3800-GCM |
Downloads
Product Stock
Please be advised that our stores do not hold any stock. In order to make sure things go as fast as possible you can purchase your parts online. If you would like to have your parts installed by us please choose Click & Fit at the checkout.
You can use the shipping calculator to find your shipping costs, your closest pick up or install locations. The shipping calculator will also show all shipping and installation prices. Shipping is free if you choose to get your item installed by us.
When our product stock levels are low, or current stock is allocated to orders, our website may show an ‘in-stock’ status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details.
Delivery Methods
1. Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything for you and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
2. Select “Free Pickup” as a delivery method during the checkout process and you will be given free delivery to your nearest Fulcrum outlet where you can collect the parts. We will text and email you all your tracking details.
3. Select “Deliver to Door” as a delivery method during the checkout process and we will deliver your order direct to your nominated delivery address. We will text and email you all your tracking details.
Shipping
We offer FREE shipping to all metro areas (excluding WA, TAS and NT).
If you live on the Australian coast, that does not mean you are subject to free shipping.
Express shipping times and free shipping times are only to be counted once the order has been shipped from our warehouses. Our free shipping and express shipping services both have the same order processing times. We first have to raise the order, then we send it to one of our warehouses for processing and once ready it will be shipped from the warehouse. The difference between express and free shipping services, is the time it takes for the item to be transported from our warehouse to your address.
Our free shipping policy is determined by densely populated metro locations and the viability of distance travelled from our distribution centres. We are constantly expanding our warehousing, so areas covered by free shipping are subject to change. See our shipping policy here.
Returns
We guarantee the fitment and quality of our products, but if you choose to return an item we offer a generous 60 day returns policy. See our returns policy here.
Warranty
All products sold by Fulcrum Suspensions are covered by a national warranty. This products warranty is subject to conditions from the date of purchase, unless otherwise stated on the item.
Warranty claims must meet certain criteria and be sent to Fulcrum Suspensions with a receipt to be eligible for a refund. See full warranty claim criteria here.
Click & Fit Guideline
Select “Click & Fit” as a delivery method during the checkout process and you will be given a special fitted price to have both the product delivered and installed. A suspension expert will be assigned to your order, who will organise everything and will help you every step of the way. You can sit back and relax, knowing that your car is going to be looked after by suspension experts.
Your assigned suspension expert will confirm all the details for your booking. Your parts will then be delivered to your closest Fulcrum workshop and an installation date will be booked based on your preference. You then bring your car on the booking date and the Fulcrum workshop will install your order.
Installation includes full product installation by a qualified technician, a full wheel alignment, a complete suspension check, a visual brake inspection, and a complete report. We also offer a complimentary 1000km check-up service, which includes a suspension check and any retention work, your alignment and tyre wear will also be checked. If we find that anything needs to be amended during our 1000km check, we will carry out this work free of charge. This includes a wheel alignment, if required. Please note that Fulcrum Dealers are independant workshops and may not supply a full suspension report or offer a 1000km checkup. Workshops that are owned by Fulcrum Suspensions will do this for you though.
Throughout your order, installation, and service. You will be kept up to date every step of the way. Fulcrum offers this service to ensure you get the best possible experience.